Tires/Wheels

Proper Procedure for Installing and Removing Snow Chains

Published

4 years ago

April 12, 2020

You know the problem while driving in heavy snow and it’s quite dangerous to drive in heavy snowfall without snow chains and snow socks. There are so many countries where it is illegal to travel without snow chains. If you are worried about installing and removing snow chains then it is quite simple. It may look complicated at first but once you are an expert in it, you don’t need to worry anymore. It is also recommended to put them before the weather get worse because it is quite difficult to install them in heavy snowfall.

We have listed down the procedure so that you can install and remove your snow chains in a most convenient way.

Contents

Getting Your Snow Chains

Before putting snow chains on your car, you need to find the right snow chains for your car. Take the proper measurement of your car before heading towards the store. You need to look at the outside edge of your tires for letter and numbers. Take a note of every detail that is required while buying snow chains.

Take a look upon the numbers because the first number will tell you the tire width, the second number will tell you about the height ratio while the third number will tell you about the diameter ratio. The snow chains packaging contains all the information that is required. Take a look upon that.

After getting the snow chains, remove it from its packaging and try to untangle the links. You need to undo any twists or kinks in the metal so that chains can be hanged freely. This may take a longer period of time so you need to do this before you actually need it.

Look at Yours

You need to look at the tire before installing them. You need to keep this in your mind that your car is in the park before you begin installing your snow chains. Look at the tires so that you can able to identify how many snow chains is required.

If it’s a vehicle is front wheel drive then you need to install 2 snow chains on your front chain drive and if your vehicle is rear wheel drive then you need to install two chains in your car. Well, in total you need to install four chains for each tires for your protection during extreme weather condition.

Fit the Snow Chains

Before you made any process always ensure that your car is in brake and in parking side. Straight the length of the chains so that it can hang down the alone side and it will cover a minimum 3 rounds of your tire. You also need to make sure that the chains are running side by side so that the width the tire is straight as well.

Now you need to place the chains in the bottom of the tire and place them straight when you drive forward. There are different kind of snow chains the rings fastened the chains.

Adjust the Chain

Before you disengaging your car brake, make sure that the surrounding is clean. After checking the surrounding put the gear on and roll forward slightly. If the small portion of the chain is unfit, adjust it while driving forward slightly. While you are testing the chains, make sure there is a full coverage of your tire and turn your wheel inside the vehicle so that it can get easy access for securing your chains.

Repeat this method with other tires as well. If you are installing snow chains on your back tire then you need to adjust this by moving back.

Connect the Chains Properly

Before you move forward you need to connect the inner part of the tire which is near to axle and then you need to connect it with two hooked edges. Now you need to rotate the closer link so that you can tighten the chains on the comfortable position at a possible stage.

There are different types of procedure for tightening different chains such as traditional chains can be tightened by a link-tightening tool. So make sure that you used the correct method for tightening your chains. You also need to make sure that your chains are straight and if it’s not then tight them.

Drive and Re-Tighten the Chains

You need to know this that the snow chains will shift while driving. You need to make sure that it is tightened enough to give a good grief in your tire. You also need to know this that tight chains will give to ultimate protection while you are in the road. You can also use a closer link to re-tighten the chains after taking a short drive.

Removing Snow Chains from a Car Tire

1. Remove Them on Time

You need to remove them if the weather condition has improved as well as your driving condition. You can also remove them if you found a signed road which is indicating “snow chains are not required”. Never drive on the road by keeping your chains on as it will destroy the road and also gives a negative impact on your car tire.

2. Disconnect the Rings

You need to get down the ground and try to disconnect the outer connection. You need to move forward until you get the full access. You need to keep this in your mind that if you can install bungee cord then you need to remove them first before removing the snow chains.

3. Open the Car Chains

After getting the full access, now you can remove them successfully. You will also notice that the chains are stuck with the underneath but laying the chains flat will not cause any damage to your car tires or road. You need to make sure that the chains are not stuck with wheels ankle. Removing them is one of the easy procedures.

4. Drive to Open it Completely

After the above procedure, you need to pull forward enough so that the tire will clear the chains completely. After the chains are fully removed, slide them away from the vehicle.

Autosaa

Proper Procedure for Installing and Removing Snow Chains

Tires/Wheels

Proper Procedure for Installing and Removing Snow Chains

Getting Your Snow Chains

Look at Yours

Fit the Snow Chains

Adjust the Chain

Connect the Chains Properly

Drive and Re-Tighten the Chains

Removing Snow Chains from a Car Tire

1. Remove Them on Time

2. Disconnect the Rings

3. Open the Car Chains

4. Drive to Open it Completely

Leave a Reply

Home Garage: Trusted 4 Post Car Lifts for DIY Auto Enthusiasts

How Much Does Commercial Truck Insurance Cost?

Car Seat Covers & Other Ways to Protect Your Car’s Interior

Garages for Rent: A Convenient and Affordable Storage Solution

6 Tips for Getting Your Truck Ready for Winter

Facebook

Trending

Autosaa

Proper Procedure for Installing and Removing Snow Chains

Getting Your Snow Chains

Look at Yours

Fit the Snow Chains

Adjust the Chain

Connect the Chains Properly

Drive and Re-Tighten the Chains

Removing Snow Chains from a Car Tire

1. Remove Them on Time

2. Disconnect the Rings

3. Open the Car Chains

4. Drive to Open it Completely

You may like

Leave a Reply

Home Garage: Trusted 4 Post Car Lifts for DIY Auto Enthusiasts

How Much Does Commercial Truck Insurance Cost?

Car Seat Covers & Other Ways to Protect Your Car’s Interior

Garages for Rent: A Convenient and Affordable Storage Solution

6 Tips for Getting Your Truck Ready for Winter

Facebook

Trending