Garage Door Repair – How to Repair Garage Door Rust

It is a scary thought that you might have garage door rust but in most cases, it is something you will be able to clean yourself. Most people do not want to take the time to learn how to fix their car, they would rather just buy another one. This is a horrible idea because it is important that you keep your car in good shape and if you let rust get too far into your garage then you are going to have major problems with the value of your car. This how-to-remove garage door rust tutorial will give you some tips on how to get your car back in tiptop shape as soon as possible.

• The first tip that you should know when learning how to remove rust is to never leave the garage door open while it is being washed. The reason why is because once the car dries out it will cause a buildup of moisture in the garage. When this happens it is very hard for the paint to dry and therefore the rust will show through the paint. This how-to remove garage door rust is easy to follow. Close your door totally and take a bucket full of warm water, dish soap, and a sponge and brush.
• After you have cleaned the car, you are going to need to apply a salt spray to the area. What you are looking for is a light salt spray to make sure the rust does not penetrate through the layers of paint. After you have applied the salt spray, use a scrubbing sponge to gently scrub the rusting areas. You may have to repeat this process several times until all of it has been removed. The process will take quite a while but it will be worth it if you can avoid having major garage door rusting problems in the future.
• After you have cleaned up the rust spots, you will then want to use coarse salt to take away any of the remaining rust. Make sure the salt is not too coarse though or you will end up with a red rash on your garage door that will be very unattractive. After you have applied the coarse salt wash the area again with plain warm water. Once you have done this you will then want to rinse off the salt with water. Make sure that all of the salt is removed from the cracks and edges before you apply the primer.
• The next step is to take a q-tip or other small paintbrush and spray the area with the wd-40. Make sure that the wd-40 is sprayed straight down so that the salt exposure is not going to be spread to other parts of the door. Work in a back and forth motion so that you do not miss any spots. For best results, let the wd-40 sit overnight. If you find that there are still salt spots after letting the wd-40 sit overnight, then you may have to sand the door until it is completely smooth.

Once you have let the wd-40 sit overnight, you will then want to clean up the salt residue. You will want to remove all of the salt from the crack and grind where it was applied. When you have finished cleaning, coat the area with primer and let it dry. Before you can start applying the paint you will again want to let it dry so that you do not get any paint on the garage door while it is still fresh.